 |
| Capable of drilling at any angle, into curved surfaces, and irregular shapes.
Precision servo motor control for stable drilling.
Designed for drilling hardened tool steel, carbides and other conductive materials.
Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes.
Automatic pressure release function is used in the system.
The long life worktable is made of stainless steel. |
| |
| DIMENSIONS |
|
KTH-305 |
Work table dimension
|
mm |
500 × 300 |
Max. Workpiece dimension
|
mm |
875 x 470 |
| Table travel X/Y |
mm |
350 × 250 |
|
|
  |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
350 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø0.2~Ø3.0 |
| Max. Workpiece weight |
kgs |
150 |
| Dielectric |
- |
Water |
Capacity of dielectric
|
litres |
20 |
| Machine weight (nw/ gw) |
kg |
800/ 900 |
| Packing dimension |
mm |
1240 × 1210 × 2240 |
| ---------------------------------------------------------------- |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220/ 380/ 415 |
| Max. Rating power |
KVA |
4 |
 |
|
| Standard accessories |
Manual Drilling EDM |
| 5μ 2 axis optical scale and monitor |
ˇ |
Precision electrode collet jig
Ø0.1~Ø3.0mm |
ˇ |
| Electrode pipe guide Ø1.0mm |
ˇ |
|
 |
| Electrode tube Ø1.0mm × 10 |
ˇ |
| Halogen work lamp |
ˇ |
| Tool box × 1 |
ˇ |
| Filter × 2 |
ˇ |
| Parallel block 1set |
ˇ |
| X, Y, Z axis precision ball screw |
ˇ |
| Auto pressure release pump × 1 |
ˇ |
| X, Y, Z axis precision servo motor |
Z axis |
|
|
※ The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.
