 |
|
Precision servo motors on X,Y,Z axes provide excellent stability during drilling.
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements.
C type structure.
NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
The machining coordinate can be input directly when NC program is not available.
Automatic edge, internal diameter finding, and centering.
Coordinates can rotate at any angle.
Mirror image function.
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes.
Automatic illustrates the path of current and next drilling position with color.
Z axis auto reset and depth calculation. (Z axis automatically checks depths of holes, and returns to complete any that are too shallow.)
Data could be input by USB, or transfer through RS232 transmission and network. Direct and easy learning dialogue operation interface. |
| |
| DIMENSIONS |
|
KTH-205CNC |
Work table dimension
|
mm |
500 × 300 |
Max. Workpiece dimension
|
mm |
990 × 490 |
| Table travel X/Y |
mm |
350 × 250 |
|
|
  |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
150 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø0.2~Ø3.0 |
| Max. Workpiece weight |
kgs |
150 |
| Dielectric |
- |
Water |
Capacity of dielectric
|
litres |
20 |
| Machine weight (nw/ gw) |
kg |
850/ 950 |
| Packing dimension |
mm |
1300 × 1500 × 2240 |
| Machine structure |
- |
C-type |
| ---------------------------------------------------------------- |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220/ 380/ 415 |
| Max. Rating power |
KVA |
4 |
 |
|
| Standard accessories |
CNC Drilling EDM |
Precision electrode collet jig
Ø0.1~Ø3.0mm |
ˇ |
| Electrode pipe guide Ø1.0mm |
ˇ |
| Electrode tube Ø1.0mm × 10 |
ˇ |
|
 |
| Halogen work lamp |
ˇ |
| Tool box × 1 |
ˇ |
| Filter × 2 |
ˇ |
| Parallel block 1set |
ˇ |
| X, Y, Z axis precision ball screw |
ˇ |
| Auto pressure release pump × 1 |
ˇ |
| X, Y, Z axis precision servo motor |
ˇ |
| 1μ 2 axis optical scale and LCD |
ˇ |
| X, Y, Z axis hand wheel |
ˇ |
| USB |
ˇ |
| RS232 transfer |
ˇ |
|
|
※ The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.
